LS Motor Controller VFD 3-Phase 0.4KW/0.5HP, SV004iG5A-4
USD 338.62
In stock
Quantity: 1
Only 1 left
Alliance Part No
SV004iG5A-4
Mfr. Part No
SV004iG5A-4
Datasheet
LS Motor Controller VFD 3-Phase 0.4KW/0.5HP, SV004iG5A-4 is available to buy in increments of 1
Shipping
Local & International
Guarantee
30 Days Money Back
Payment On Delivery
Cash On Delivery Option
Online Suport
We Have Support 24/7
LS Starvert Series V/F, Sensorless Vector Control Frequency Inverter Drive, 0.4KW / 0.5HP, I/P: 3 Phase 380~480V, O/P: 3 Phase 380~480VAC, 0~400Hz.
General Characteristics
General Characteristics
| Control | Control method | V/F, Sensorless vector control | |||
| Frequency setting resolution | Digital command: 0.01Hz | ||||
| Analong command: 0.06Hz (Max. freq.: 60Hz) | |||||
| Frequency accuracy | Digital command: 0.01% of Max. output frequency | ||||
| Analong command: 0.1% of Max. output frequency | |||||
| V/ F pattern | Linear, Squared, User V/F | ||||
| Overload capacity | 150% per 1 min. | ||||
| Torque boost | Manual/Auto torque boost | ||||
| Dynamic braking | Max. braking torque | 20% | |||
| Max. Duty | 150% when using optional DB resistor | ||||
| Operation | Operation mode | Keypad/ Terminal/ Communication option/ Remote keypad selectable | |||
| Frequency setting | Analog: 0~10V, -10~10v, 0~20mA | ||||
| Digital: Keypad | |||||
| PID, Up-down, 3-wire | |||||
| Input | Multi-function terminal P1~P8 | NPN/PNP selectable | |||
| FWD/REV RUN, Emergency stop, Fault reset, Jog operation, Multi-step Frequency-High, Mid, Low, Multi-step Accel/Decel-High, Mid, Low, DC braking at stop, 2nd motor select, Frequency UP/Down, 3-wire operation, External trip A, B, PID-Inverter (V/F) operation bypass, Option-inverter (V/F) operation bypass, Analog Hold, Accel/ Decel stop | |||||
| Output | Open collector terminal | Fault output and inverter status output | Less than DC 24V, 50mA | ||
| Multi-function relay | (N.O., N.C.) Less than AC 250V, 1A; Less than DC 30V, 1A | ||||
| Analog output (AM) | 0~10Vdc (less than 10mA): Output freq, Output current, Output voltage, DC link selectable | ||||
| Protective function | Trip | Over voltage, Under voltage, Over current, Ground fault current detection, Inverter overheat, Motor overheat, Output phase open,Overload protection, Communication error, Loss of speed command,Hardware fault, Fan trip | |||
| Alarm | Stall prevention, Overload | ||||
| Momentary power loss | Below 15 msec.: Continuous operation ( Should be within rated input voltage, rated output power) | ||||
| Above 15 msec.: Auto restart enable | |||||
| Environment | Protection degree | IP 20, NEMA1 ( Optional) | |||
| Ambient temp | -10°C ~50°C | ||||
| Storage temp | -20°C ~ 65°C | ||||
| Humidity | Below 90% RH (No condensation) | ||||
| Altitude/Vibration | Below 1,000m, 5.9m/sec (0.6G) | ||||
| Atmospheric pressure | 70~106 kPa | ||||
| Location | Protection from corrosive gas, Combustible gas, Oil mist or dust | | |||
| Manufacturer | LS Electric |
|---|---|
| Brand | LS Electric |
| Alliance Part No | SV004iG5A-4 |
| Mfr. Part No | SV004iG5A-4 |
| Datasheet | Download |
Write Your Own Review
LS Motor Controller VFD 3-Phase 0.4KW/0.5HP, SV004iG5A-4
