Carlo Gavazzi Photoelectric Sensor Diffuse Reflective w/Background Suppression IO-Link Rectangular Housing, PD30CTBI20BPA2IO

Carlo Gavazzi Photoelectric Sensor Diffuse Reflective w/Background Suppression, IO-Link, Rectangular, Infrared Light, 200mm, NPN/PNP/Push-pull, NO/NC, 2m Cable, 10-30Vdc.
The PD30CTBx20BPxxIO are a part of the latest generation of high performance photoelectric sensors designed to solve most detection tasks due to the new IO-Link features. The sensors are implemented in the compact 10 x 20 x 30 mm ABS housing that are acknowledged worldwide. New implemented functions with weight on functionality, reliability, Predictive maintenance make these sensors ideal for Industry 4.0.

Benefits

• Red or infrared Background suppression sensor with IO-Link with a adjustable distance of 25 to 200 mm, either by trimmer or via IO-Link.
• Application functions: Pattern Recognition, Speed & Length, Divider function and Object & Gap Monitoring.
• Neighbour Immunity, selectable up to 3 sensors.
• Easy customization to specific OEM requests by use of the build in IO-Link functionalities.
• The output can be operated either as a standard switching output or in IO-Link mode.
• Fully configurable via output IO-Link v 1.1. Electrical outputs can be configured as PNP / NPN / Push-Pull / External input, normally open or normally closed.
• Timer functions can be set, such as ON-delay, Off-delay, and one shot.
• Logging functions: Temperatures, detecting counter, power cycles and operating hours.
• Detection modes Background suppression (BGS), single point, two point, windows and foreground suppression (FGS) mode.
• Logic functions: AND, OR, XOR and Gated SR-FF.
• Analogue output: In IO-Link mode the sensor will generate 16 bit analogue process data output representing various selectable process data such as received signal level.

Application

Pattern Recognition: An easy way to verify that a product is manufactured to the specification e.g. Furniture production where tabs or holes has to be with a defined pattern. Speed and Length: Monitor the speed and length of an object on a conveyor for e.g. sorting on size. Divider function: A de-central counting function that gives a signal when a preset count level is reached e.g. when certain items are packed in a carton box it asks for a new box. Object and Gap Monitoring: Function that can sort out good objects and gaps between them so e.g. a packaging machine only receives objects with the correct size and gaps.

Main Functions

• Detects presence or absence of objects that cut off the light from the emitter.
• The detection distance is very independent of the colour of the object to detect.
• The sensor can be operated in IO-Link mode once connected to an IO-Link master or in standard I/O mode.
• Measured sensing distance as process data.
• Neighbour interference protection.
• Sensing distance by potentiometer, teach by wire or by IO-link parameter.
• Quality of Run and Quality of Teach result.
• Temperature data for preventive maintenance.
• Front-end check for preventive maintenance.

Adjustable parameters via IO-Link interface

• Sensing distance and hysteresis.
• Sensing modes: single point or two point or window mode.
• Timer functions, e.g.: On-delay, Off delay, One shot leading edge or trailing edge.
• Logic functions such as: AND, OR, X-OR and SR-FF.
• External input.
• Logging functions: Maximum temperatures, minimum temperatures, operating hours, operating cycles, power cycles, minutes above maximum temperature, minutes below minimum temperature, etc.
• Auto hysteresis.
• Special functions: Pattern Recognition, Speed & Length, Divider function and Object & Gap Monitoring.